background image

我們建議您從 

GAUI

 官方網站的下載區下載,

並使用最新的手冊。
本產品是無線遙控的直升機,不當的操作,保養或是組裝
有可能導致遙控直升機對於人身或是物品造成危險。包括,
但是不局限於對於人體產生嚴重傷害甚至死亡的可能性。

INSTRUCTION MANUAL

We recommend downloading and using the latest manual 
from Official 

GAUI

 website’s download area.

This product is for a radio controlled (RC) helicopter.
Improper operation, maintenance or assembly can 
potentially  cause a RC helicopter to pose a danger 
to persons or objects including but not limited to 
the possibility  of causing serious physical injury and 
even death.  

Tail Rotor Belt 544 MXL x1pcs

Content:

544 MXL 皮帶 x1 pcs

內容物:

Tail Boom (belt version)(425mm) x 1pcs

X3 皮帶版尾管(425mm) x1 pcs

X3 Tail prod (403mm) x 1pcs

X3 尾拉桿(403mm) x1 pcs

71T Front Pulley Gear Set x 1pcs

71T 主皮帶齒輪 x1 pcs

15T Tail Pulley Gear Set x 1pcs

15T 尾皮帶齒輪 x1 pcs

X3 Tail Output Shaft x1pcs

X3 尾軸 x1 pcs

Guide Wheel  x2pcs

導輪 x2 pcs

4.8Ball Links Pack  x2pcs

4.8mm 拉桿頭 x2 pcs

Bearing(B2x5x2.5)x4pcs

Washer (W2x3.5x0.5)x2pcs

軸承B2x5x2.5 x4 pcs
華司W2x3.5x0.5 x2 pcs

Pin (P1.5x10.5)x1pcs

插銷 P1.5x10.8 x1 pcs

Socket Set Screw (M2x2)x1pcs

M2X2 六角止付螺絲 x1 pcs

Socket Head Button Screw (M2x4)x4pcs

M2x4 水滴六角螺絲 x4 pcs

Socket Head Cap Screw (M2x8)x1pcs

M2x10 六角螺絲 x2 pcs

Содержание X3








Отзывы: