GT410 ATF System Service Centre
8
4.2 Decrease fluid amount
If the quantity of the ATF is more than the standard amount, it is necessary to decrease
the fluid amount inside transmission.
Select adjust function, set the amount of return used fluid, press the ENTER key to run.
5. Empty new fluid tank/used fluid tank
1) Select the empty fluid tank function
2) Connect the drain oil pipe to the drain oil port of the unit. Prepare a wasted fluid tank.
3)
Choose the need to
empty fluid tank, press the ENTER key to run.
4) The unit will stop after the fluid tank is empted..
6. System setting
1
）
Select the system setting function.
2
）
Select each function to operate.
6.1 Parameter setting
Language : English and Chinese
Unit: metric, Imperial and U.S.
6.2 Calibration
It will require setting the weight of weights during calibration. The weight of weights range is 10kg~20kg.
The calibration can be performed steps by the prompts of LCD panel.
6.3 Pipelines self-clean
Fill new fluid which is different from the fluid before into the new tank. It will clean the pipelines through
this function.
6.4 System inquiry
It can inquire the total times of service.
6.5 Equipment info
It can inquire the serial number and version of the unit.
6.6 Help
It list
warning or alarm information of equipment
of the unit. And provide the simple solution.
