Gateway MX6708 Скачать руководство пользователя

Страница: 38 / 72

CHAPTER 2: Checking Out Your Gateway Notebook

www.gateway.com

Slide the battery release latch, then slide the battery out of the notebook.

Slide a recharged battery into the notebook until it snaps into place.

Slide the battery lock to the locked position.

Turn your notebook over.

Reattach the optional port replicator.

Open the LCD panel and press the power button.

Installing a secondary battery

Warning

Danger of explosion if battery is

incorrectly replaced.

Replace only with a battery specifically

manufactured for your Gateway

notebook. Discard used batteries

according to local hazardous material

regulations.

The battery used in this device may

present a fire or chemical burn hazard if

mishandled. Do not disassemble, heat

above 212°F (100°C), or incinerate.

Dispose of used battery promptly. Keep

away from children.

Caution

If your notebook is connected to AC

power, or if you have a charged main

battery installed, you can change the

secondary battery while the notebook is

turned on. If your notebook is not

plugged into an AC outlet, and you do not

have a charged main battery installed,

you must turn the notebook off while

changing the battery or you will lose any

unsaved data.

Your notebook’s modular bay accepts a secondary battery. The secondary
battery charges when the notebook is connected to AC power.

To install a secondary battery:

■

Swap the secondary battery for a bay module by following the instructions
in

“Changing modules” on page 27

Содержание MX6708









































































Результаты поиска

Содержание MX6708

Отзывы:

Похожие инструкции для MX6708

Бренды по названию

Популярные бренды

Gateway MX6708, Справочник по аппаратуре

Результаты поиска

Содержание MX6708

Отзывы:

Похожие инструкции для MX6708

Бренды по названию

Популярные бренды