Gateway M675, Руководство по обслуживанию

Страница: 45 / 69

40
www.gateway.com
Replacing the LCD panel assembly
Tools you need to complete this task:
Screws removed during this task:
To replace the LCD panel assembly:
1
Follow the instructions under “Preventing static electricity discharge” on page 5 .
2
Disconnect the AC adapter and modem and network cables, then prepare the
notebook by following the instructions in
“Preparing the notebook” on page 6 .
3
Turn the notebook over so the bottom is facing up.
4
Remove the battery by following the instructions in “Removing the battery” on
page 7 .
5
Remove the hard drive by following the instructions in “Replacing the hard drive kit”
on page 9 .
Flat-blade driver Scribe or non-marring tool - OR -
Phillips #0 screwdriver
Torx T8 screwdriver
4 chrome 2.5 × 2.5 mm
(hinge cover)
5 chrome 2.5 × 2.5 mm
(keyboard)
1 chrome 2.5 × 2.5 mm
Torx
(mini-PCI card)
6 chrome 2.5 × 2.5 mm
(LCD panel assembly)
2 chrome 2.5 × 2.5 mm
(LCD plug)