Gateway M675, Руководство по обслуживанию

Страница: 17 / 69

12
www.gateway.com
Replacing the hard drive in the hard drive
kit
Tools you need to complete this task:
Screws removed during this task:
To replace the hard drive in the hard drive kit:
1
Follow the instructions under “Preventing static electricity discharge” on page 5 .
2
Disconnect the AC adapter and modem and network cables, then prepare the
notebook by following the instructions in
“Preparing the notebook” on page 6 .
3
Turn the notebook over so the bottom is facing up.
4
Remove the battery by following the instructions in “Removing the battery” on
page 7 .
5
Remove the hard drive kit by following the instructions in “Replacing the hard drive
kit” on page 9 .
Phillips #0 screwdriver
4 chrome 3 × 3.5 mm
(hard drive kit)