Gateway M320, Руководство пользователя

Страница: 63 / 158

57 www.gateway.com
■
Remove the battery. For more information, see “Changing batteries”
on page 51 .
■
Disconnect all peripheral devices and remove any PC Cards.
Before working with computer components, follow these guidelines:
■
Avoid static-causing surfaces such as carpeted floors, plastic, and
packing foam.
■
Remove components from their antistatic bags only when you are
ready to use them. Do not lay components on the outside of
antistatic bags because only the inside of the bags provide
electrostatic protection.
■
Always hold components by their edges. Avoid touching the edge
connectors. Never slide components over any surface.
Adding or replacing memory
Your notebook uses memory modules called SO-DIMMs (Small Outline
Dual Inline Memory Modules). The modules are available in various
capacities and any module can be placed in any available slot. Use only
memory modules designed for your Gateway notebook for upgrading
your memory.
To add or replace memory modules:
1
Follow the instructions under “Preventing static electricity
discharge” on page 56 .
2
Turn off your notebook, disconnect the AC adapter and modem and
network cables.
3
Turn your notebook over so the bottom is facing up.
4
Remove the battery. For more information, see “Changing batteries”
on page 51 .
5
Remove the memory bay cover screw, slide the memory bay cover,
then remove it. For the location of the memory bay, see
“Bottom”
on page 14 .