Gateway GM5416, Справочное руководство

Страница: 92 / 132

CHAPTER 6 : Troubleshooting
86
The modem is noisy when it dials and connects
When your modem tries to connect to another modem, it
begins
handshaking . Handshaking is a digital “getting
acquainted” conversation between the two modems that
establishes connection speeds and communication protocols.
You may hear unusual handshaking sounds when the modems
first connect. If the handshaking sounds are too loud, you can
turn down the modem volume.
To turn down the modem volume:
1
Click ( Start ), then click Control Panel . The
Control Panel window opens.
2
Click Hardware and Sound , then click Phone and
Modem Options . The Phone and Modem Options
dialog box opens.
3
Click the Modems tab, click the modem you want
to adjust, then click Properties .
4
Click the Modem tab, then adjust the Speaker
volume control.
5
Click OK twice to close the Phone and Modem
Options dialog box.
Monitor
The screen resolution is not correct
•
Change the screen resolution from the Display Settings
dialog box. For more information, see the “Customizing
Windows” chapter in the online
User Guide.
The computer is running but there is no picture
•
Make sure that the monitor is plugged in and turned on.
If the monitor is turned on, the power LED should be lit.
•
Adjust the brightness and contrast controls to the
center position.
•
Make sure that the monitor cable is connected to the
video port on the back of your computer.
•
Check the cable for bent or damaged pins.
•
Reinstall the device driver.
•
Connect a monitor that you know works to your
computer.
8512041.book Page 86 Friday, December 15, 2006 5:08 PM