Gateway FX6800, Справочное руководство, Страница: 57 / 154

www.gateway.com
51
7
Replace the side panel by following the instructions in
“Replacing the side panel” on page 48 .
8
Reconnect the cables and the power cord.
9
Turn on your computer. Windows starts and the
Windows desktop appears.
10
Click ( Start ), right-click Computer , then click
Properties . The amount of memory in your computer
is displayed.
Replacing the system battery
If the computer clock does not keep time or the settings in
the BIOS Setup utility are not saved when you turn off your
computer, replace the system battery. Use a battery of the
same size and voltage as the original battery that was in your
computer.
To replace the battery:
1
Restart your computer.
2
During the restart, press and hold the F1 key. The main
menu of the BIOS Setup utility opens.
3
Write down all the values in the menus and submenus,
then exit from the utility.
4
Shut down your computer.
5
Remove the side panel by following the instructions in
“Removing the side panel” on page 45 .
6
For more stability, place your computer on its side. To
avoid scratching the case, place it on a towel or other
non-abrasive surface.
Warning
Danger of explosion if battery is incorrectly replaced. Replace only with
the same or equivalent type recommended by the manufacturer. Dispose of
used batteries according to local hazardous materials regulations.
8511858.book Page 51 Monday, December 18, 2006 10:51 AM