Gateway FX530, Справочное руководство, Страница: 67 / 143

CHAPTER 5: Upgrading Your Computer
62
www.gateway.com
You do not need to replace the
thumbscrew because it was originally
installed for shipping purposes.
9
Connect the drive cables using your notes
from Step 3. If you are installing a new
drive, follow the manufacturer’s
instructions.
10
Replace the front bezel by following the
instructions in “Replacing the front bezel”
on page 54.
11
Replace the side panel by following the
instructions in “Replacing the side panel”
on page 55.
Replacing the memory card reader
To replace the memory card reader:
1
Remove the side panel by following the
instructions in “Removing the side panel”
on page 51.
2
Remove the front bezel by following the
instructions in “Removing the front bezel”
on page 53.
3
Disconnect the memory card reader
cables, noting their locations and
orientation. (You will reconnect the cables
after you install the new memory card
reader.)
8511781.book Page 62 Tuesday, October 10, 2006 4:41 PM