Gateway E-842R, Руководство пользователя

Страница: 127 / 164

List of events www.gateway.com
121
3
At the Main window click RESCAN . After the rescan is complete, events
are no longer sent to the Windows operating system event log.
List of events
Important
Events in this section are categorized,
then listed in order of their individual
Event Type [ID].
Controller events
The following table provides a brief description of the events which relates to
all models of the RAID controller and the configuration. The type [ID] format is:
Event type name with its associated ID expressed in hexadecimal (decimal)
(displayed in the OS).
Controller Events Messages Type [ID] Cause Action
There was a fatal xxxx .
Where xxxx could be:
- Watchdog Error
- ECC Error
- Host Fibre Channel
Interface
Error on Loop <xx>
- Firmware Error 0x<xx>.
Additional Info: 0x<xx>
0x<xx> 0x<xx> 0x<xx>
0x<xx> 0x<xx> 0x<xx>
0x<xx> 0x<xx> 0x<xx>
0x<xx> 0x<xx>
Error
[0xB01
(2817)] Internal hardware or
firmware failure.
Fault SDRAM or
damaged internal bus.
Internal hardware.
Memory or bus error
on the indicated
channel. Replace the controller.
Contact Customer
Care.
The controller’s internal
temperature <
aa >C has
exceeded the maximum
limit. The controller shuts
down to prevent damage.
Error
[0xB03
{2819)] Blocked fan.
Failing fan.
Elevated ambient
temperature. Check enclosure for
sufficient air flow.
Check for a failed fan. If
found, replace the
cooling fan module.
Check the ambient
temperature of the
environment.
Decrease the local
ambient temperature.
The controller’s internal
temperature <
aa >C is
approaching the maximum
limit. You should check the
cooling system for
problems.
Warning
[0xB04
(2820)] Blocked fan.
Failing fan.
Elevated ambient
temperature. Check enclosure for
sufficient air flow.
Check for a failed fan. If
found, replace the
cooling fan module.
Check the ambient
temperature of the
environment.
Decrease the local
ambient temperature.