background image

139

Troubleshooting

www.gateway.com

The complexity of graphics and multimedia on Web pages

Having multiple Web browsers open, performing multiple downloads, and 
having multiple programs open on your computer

People are sending you e-mail messages, but you have not received 
any mail

Click the receive button in your e-mail program.

Make sure that your account with your Internet service provider (ISP) is 
set up correctly. Contact your ISP for technical support.

Keyboard

The keyboard does not work

Make sure that the keyboard cable is plugged in correctly. For more 
information, see the poster that came with your computer.

Remove all extension cables and switch boxes.

Clean the keyboard by using an aerosol can of air with a narrow, straw-like 
extension to remove dust and lint trapped under the keys.

Try a keyboard that you know works to make sure that the keyboard port 
works.

Reinstall the keyboard device driver. For more information, see 

“Reinstalling device drivers” on page 81.

A keyboard character keeps repeating or you see a “keyboard stuck” 
or “key failure” error message

Make sure that nothing is resting on the keyboard.

Make sure that a key is not stuck. Press each key to loosen a key that might 
be stuck, then restart your computer.

Liquid spilled in the keyboard

If you spilled liquid in the keyboard, turn off your computer and unplug the 
keyboard. Clean the keyboard and turn it upside down to drain it. Let the 
keyboard dry before using it again. If the keyboard does not work after it dries, 
you may need to replace it.

Содержание E-6100





























































































































































































Отзывы: