Gateway DX4320, Руководство по установке оборудования, Страница: 49 / 64

45
Partitioning the new drive
www.gateway.com
7
If the new drive is a master (boot) drive, type
1
for the
Fixed hard drive
Number
.
- OR -
If the new drive is a slave drive, type
2
for the
Fixed hard drive Number
.
8
Press E
NTER
. The
FDISK Options
menu appears with the appropriate drive
selected as the current fixed disk drive.
9
Type
1
, then press E
NTER
. The
Create DOS Partition
or
Logical DOS Drive
menu
opens.
10
Type
1
, then press E
NTER
. The
Create Primary DOS Partition
screen appears
and your computer verifies the drive integrity.
11
Type
Y
, then press E
NTER
. The message
Primary DOS Partition created, drive
letters changed or added
appears.
12
Press E
SC
. The
FDISK Options
menu opens.
13
Press E
SC
. FDISK closes.
14
If you want to create an extended DOS partition, go to “Creating the
extended partition” on page 46.
- OR -
If you do not want to create an extended DOS partition, go to “Formatting
the New Drive” on page 50.