56 Maintaining and Troubleshooting the Gateway ALR 8300 Server
•
System Date: lets you set the system date. Use the format
MM/DD/YYYY
•
Legacy Diskette A: allows you to select the type of diskette drive
installed as drive A. The options are
360 kB, 5 ¼”; 1.2 MB, 5 ¼”;
720 kB, 3 ½”; 1.44/1.25 MB, 3 ½”;2.88 MB, 3 ½”; NOT
INSTALLED;
and
DISABLED
.
•
Legacy Diskette B: allows you to select the type of diskette drive
installed as drive B. The options are
360 kB, 5 ¼”; 1.2 MB, 5 ¼”;
720 kB, 3 ½”; 1.44/1.25 MB, 3 ½”;2.88 MB, 3 ½”; NOT
INSTALLED;
and
DISABLED
.
•
Primary Master: opens the Primary Master screen to permit you
to setup the primary master hard disk drive. Details of this screen
are provided in the section “Hard disk drive setup screen” on
page 57.
•
Primary Slave: opens the Primary Slave screen to permit you to
setup the primary slave hard disk drive. Details of this screen are
provided in the section “Hard disk drive setup screen” on page 57.
•
Secondary Master: opens the Secondary Master screen to permit
you to setup the secondary master hard disk drive. Details of this
screen are provided in the section “Hard disk drive setup screen”
on page 57.
•
Secondary Slave: opens the Secondary Slave screen to permit you
to setup the secondary slave hard disk drive. Details are provided in
the section “Hard disk drive setup screen” on page 57.
•
System Memory: shows the amount of base system memory
detected. This field is for reference only.
•
Extended Memory: shows the amount of extended memory
detected. This field is for reference only.
4081TL.book Page 56 Tuesday, December 22, 1998 1:27 PM
