Gateway 600 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 103

Gateway 600 Скачать руководство пользователя страница 5

1

Replacing

Gateway 600YG2

Components

Use this service guide to help plan your maintenance tasks
for the Gateway 600YG2 notebook. All tasks covered in this
guide can be performed by an

authorized field technician

without jeopardizing the notebook’s warranty.

For information on the notebook’s general maintenance,
technical support, safety notices, and regulatory notices,
see the Gateway user’s guide.

If you have suggestions regarding the content of this guide,
send an e-mail with the subject “Service Guide Comments”
to

[email protected]

.

© 2003 Gateway, Inc. All rights reserved. Gateway, Gateway Country, the Gateway
stylized logo, and the black-and-white spot design are trademarks or registered
trademarks of Gateway, Inc. in the United States and other countries. All other brands
and product names are trademarks or registered trademarks of their respective
companies.

Important

This service guide is not intended to be
provided to individual users or consumers.
It cannot be provided to anyone other than
an authorized service provider.

«
...
3
4
5
6
7
...
»

Содержание 600








































































































Отзывы:

Нет отзывов