Gateway 450ROG, Руководство пользователя

Страница: 271 / 322

261
Troubleshooting
www.gateway.com
You see a “Data error” message
This may be the result of a defective area on the hard drive. To fix hard drive
problems, run the Error checking program. For more information, see
“Checking the hard drive for errors” on page 213 .
The hard drive cannot be accessed, or you see a “General failure
reading drive C” error message
■
If a diskette is in the external diskette drive, eject it and restart your
notebook.
■
Make sure that the hard drive is installed correctly. Remove it, firmly
reinsert it, then restart your notebook. For more information, see
“Replacing the hard drive” on page 239 .
■
If your notebook has been subjected to static electricity or physical shock,
you may need to reinstall Windows.
You see a “Non-system disk”, “NTLDR is missing”, or “disk” error
message
■ Eject the diskette from the external diskette drive, then press E
NTER
.
The secondary hard drive is not recognized
■ The modular drive may not be inserted completely into the drive bay. Press
the drive into the bay, then try to access the drive again.
Internet
See also “Modem (dial-up)” on page 264 .
You cannot connect to the Internet through the dial-up modem
■ Make sure that the modem cable is plugged into the modem jack and not
the Ethernet network jack. See
“Back” on page 6 and “Back” on page 246
to make sure that the connections have been made correctly.
■ Make sure that your notebook is connected to the telephone line and the
telephone line has a dial tone.
■ If you have the call waiting feature on your telephone line, make sure that
it is disabled.
■ Make sure that you are not using a digital, rollover, or PBX line. These lines
do not work with your modem.