Gates UNIPRESS 4, Руководство по эксплуатации

Страница: 13 / 54

13
GATES.COM
UNIPRESS 4 (UP4)
OPERATION MANUAL
1.2.7 APPLICATIONS VIOLATING THE REGULATIONS
If the TUBOFORM is used in any other way than described in chapter 1.2.5, the application is not according to
the intended use. Employing insufficiently qualified staff to operate the machine violates the regulations. The
company Gates Tube Fittings GmbH cannot be held responsible for damage caused by noncompliant
operation of the machine.
Any operations going beyond the utilisation mentioned above, e.g.:
ƒ
clamping and bending of unsuitable component part geometries
ƒ
operating the machine without its safety arrangements is regarded as not according to regulations .
1.2.8 GUARANTEE AND LEGAL LIABILITY
Basically, our “general sales terms and delivery conditions” apply. These are available to the user from the
date of the contract on.
Guarantee and claims on liability for damage to persons or property shall be precluded if they result from at
least one of the following causes:
ƒ
misuse of the machine;
ƒ
improper assembly, starting up, operation and maintenance of the machine;
ƒ
operating the machine despite defective safety arrangements and inadequately fitted or non-functioning
safety and protection systems;
ƒ
ignoring the directions of the Operation Manual concerning transportation, storage, setting-up, starting up,
operation, maintenance and rigging of the machine;
ƒ
unauthorised structural alterations of the machine;
ƒ
unauthorised alterations of the machine control;
ƒ
insufficient supervision of the machine parts exposed to wear;
ƒ
carelessly performed repair works;
ƒ
disasters following the influence of alien elements and superior force.