Gates Underwater Products MINI LF, Руководство по установке, использованию и уходу

Страница: 6 / 48

Introducing the MINI LF Housing Page 6
Unpacking MINI LF Housing
After you remove the MINI LF Housing from its shipping container, carefully inspect it for
missing parts or damage that may have occurred during shipment. If you discover any
discrepancies, contact Gates or your dealer immediately for assistance.
Standard Parts

MINI LF Underwater Housing.

Port(s) of choice. 8 or 10 in
Dome Port, either glass or acrylic,
or FP80 Flat Port.
 Stackable Port Ring(s) of choice
SPR80 or SPR110 size.
 Camera Bridgeplate and Mount.
 Lens Gear Drives (2x Clockwise
and 1x Counter Clockwise).
 Universal set of Guide Bars and
drive shafts.
 Hard Sided Rolling Case(s).
 Seal Check system.
 Tool Kit with case.

Various assembly and spare parts
for the MINI LF Housing including
bolts and set screws.

Spare O-Ring Kit.
 Lanyard Handle.
 Lanyard Mounts.

Trim Weights (quantity dependent
on configuration).
 GPIO / Record Cable.
 Focus / Iris Silicone Marker
Rings.
 External Monitor Housing System
with Shade Extension.
Optional Parts
 HD-SDI surface feed bulkhead
connector and cable.
 Lens Gear Knob Extensions.
 Light System.
 Tripod Adapters.
 Crane Mounts.
 Comm. Input.
 Additional Port Ring(s) for different
size lenses and LCS systems.
 Remote System Control
•
Lens Control.
•
Camera Control
•
Surface Feed Power.
•
Surface Power

Extended Battery Shell (For double
stacked batteries).