Y58
User Manual & Install Guide
133 of 148
7
Special Topics
7.1
Setting Up an IP Camera
In contrast to setting up Analog cameras, which just involves wiring up the camera to the appropriate
channel input on the device, there is an extra step required for an IP Camera. After being connected
physically, the IP Camera needs to be configured in the system with the appropriate settings and IP
address before it will work.
In the Y58 though, adding a new IP camera to the system can easily be done through the automated
setup options available in the setup menu.
7.1.1
Adding an IP Camera
The steps below provide a quick guide to adding a new IP Camera to the system manually.
For a detailed discussion on the configuration options available, please refer to
Step
7.1.1.1
Navigate to:
Main Menu Setup Surveillance IPC Setup
Enable the channel that you wish to set up the new IP Camera on, by selecting the
checkbox next to the channel number.
Scroll down to the second page to see the more channels.
