G4-504HD2a User Guide
Basic System Quick Start
32 of 151
4
Basic System Quick Start
Your G4-504HD2a will have already come pre-configured by Gatekeeper Systems with the most
common default settings which are applicable to most deployments
–
and you will only need to verify
and adjust the basic settings to get up and running. The following sections will guide you through the
basic setup process so that you can begin using your new product as soon as possible.
4.1
Step 1: Powering Up the G4-504HD2a
The Gatekeeper Project Team are able to mount and install the device into the vehicle based on your
requirements and in accordance with industry best practices from years of experience. If you prefer to
mount the device yourself, please read
for detailed hardware installation instructions.
Turning your vehicle ignition on will automatically power up the G4-504HD2a. When your vehicle
ignition is turned off, the device will automatically shut down after 5 minutes (you will be able to change
this later in the device settings).
4.2
Step 2: Connecting your Navigation Device
Once the device has powered up, please verify that you can see the display on your LCD monitor or
ICD2 with live video from connected cameras shown.
Figure 4-1 Live Camera View Shown on Device Startup
You may now use the supplied navigation device (either the Finger Mouse or ICD2) to perform the rest
of the basic setup process. For more details on connecting and using the navigation devices, please
read
Содержание G4-504HD2a
Страница 1: ...G4 504HD2a User Operating Manual Document Ref No DN3154 Version No 1 0 Document Date March 2019 ...
Страница 142: ...G4 504HD2a User Guide Hardware 142 of 151 Cabling Diagram with Analog Analog HD and Digital IP Cameras Only ...
Страница 143: ...G4 504HD2a User Guide Hardware 143 of 151 Cabling Diagram with Analog Analog HD Digital IP Cameras and Wireless ...
Страница 145: ...G4 504HD2a User Guide Hardware 145 of 151 10 1 2 Sensor Connections Figure 10 1 Wiring the Sensors CAB000383 ...
