AI282s v3 and SP25 Stop Arm Camera System Install Guide
5
SP25
•
The SP25 should be mounted between 1.5 and 1.8 meters (60~72 inches) behind the
stop arm, and the available location is in front of the emergency exit window or behind.
•
Avoid mounting the SP25 under an emergency exit window.
•
Mounting height should be between the rub rails (between the two black rub rails).
Note:
1.
The recommended mounting location of SP25 ensures the camera to capture
license plate
2.
Periodic cleaning of SP25 camera lens in required.
4 AI282s Calibration Using G4Connect
This section describes how to calibrate the AI282s camera after it is installed on a bus.
1. Connect the AI282s v3 to G4Connect, go to
Preview
, click on ‘AI Calibration’.
