SV12
User Manual & Install Guide
18 of 26
3.3.2.6
Player
On the video processor,
Navigate To
–
Setting
→
Player
Player
Not supported by gatekeeper.
3.3.2.7
Information
On the video processor,
Navigate To
–
Setting
→
Information
Information
CPU Version
Current
Shows the current version of the CPU.
Update
Load the right firmware files into the flash drive,
then plug the flash drive into Sv12. It will pick
the files.
The gear icon will grey out until the system
detects the right type of files. Then click the
gear icon to update the firmware.
Note
–
The system will restart after the update.
MCU Version
Shows the current version of the MCU.
Update
Load the right firmware files into the flash drive,
then plug the flash drive into Sv12. It will pick
the files.
The gear icon will grey out until the system
detects the right type of files. Then click the
gear icon to update the firmware.
Note
–
The system will restart after the update.
System Information
Shows the current version of the system. This
menu can be used to save the current system
setting and load the saved setting.
Network Setup
IP Address
Enter the IP address for Wi-Fi.
Wi-Fi switch
Default Setting:
▪
ON
Wi-Fi Name
Enter the Wi-Fi name.
Password
Enter the password of the Wi-Fi.
Then, click on the gear icon to save the settings.
