SV12
User Manual & Install Guide
13 of 26
3.3
Calibration
3.3.1
Board Sheet
1.
4 marking mats are needed for the calibration. It is recommended to use 100 x 100 cm mats
with 20 x 20 cm black and white patterns as shown below.
2.
Lay marking mats parallell around the vehicle and make sure you can see the whole board sheet
through the camera. Lay them as close as possible to the vehicle.
Place the “A” marked corner
closer to the vehicle.
3.
The calibration mats may need to be moved so that the mirrors do not block the view of the
calibration mats.
3.3.2
Navigate through Video Processor Menu
From the IR remote control, press menu. Using shift key select yes.
Enter the password, by default,
Password
0000000
