SV12
User Manual & Install Guide
11 of 26
3.2
Installation Guidelines
3.2.1
Instructions for Mounting the System
Installation Requirements
The device has an operating temperature range of -22°F to +155°F (-30°C to +70°C). Please ensure that
the device is mounted in an area in which acceptable temperature ranges are experienced.
As part of installation best practices, it is recommended to mount the device in the vehicle
cabin area where there is environmental control (i.e. heating and/or air-conditioning). This will
extend the device operating life by not exposing it unnecessarily to adverse environmental
conditions.
Please take a moment to read and understand the following important installation conditions
to ensure the Customer Warranty will not be voided.
▪
DO NOT remove any enclosures/covers associated with the device as this will void the warranty.
▪
Remove the In-Line Power fuse prior to jump-starting the vehicle.
▪
Select a solid ground connection for the device.
▪
DO NOT use any third-party accessories, unless approved by Gatekeeper Systems.
▪
The device is designed for interior use only. Do not install in areas that are exposed to excessive
moisture.
▪
Mount the device in a location that has good airflow and is not subject to excessive heat/cold
variations.
▪
Ensure that the device is mounted where it is not easily accessible by non-authorized personnel.
▪
Ensure that ALL provided Split Loom are used around exposed cables. Grommets are to be used
as directed by the install sheet. Failure to use provided Split Loom and Grommets will void the
warranty.
▪
Gatekeeper Systems provides Tek Screws with which to mount the SV12
–
these have been
tested and are approved for mounting.
▪
DO NOT plug in the cable to the processor until the wires have been connected
