G4-304SD1
User Manual & Install Guide
97 of 149
Sub Record – record a copy of the
video from selected channels to the
specified secondary storage, at a
separately configured (usually lower)
resolution and quality.
Mirror Record – record a copy of the
video from selected channels to the
specified secondary storage, using the
same resolution and quality as the
main recording.
Alarm Backup – record only the
alarm-triggered video to the specified
secondary storage.
None – Use this setting for sequential
recording. If two SD cards are inserted
into the G4-304SD1, once card 1 is full
of data card two will begin recording.
Please note that approximately 15
seconds of identical video will be on
both sd cards during the transition
from card 1 to card 2.
DEFAULT SETTINGS:
Mirror Record
Notes on Record Mode –
Sub Record
If the Record Mode is set to Sub Record, then
you may click on the ( Setup ) button to
configure the quality and resolution of the
recorded video to be stored to the secondary
storage. This configuration needs to be done
for each individual camera channel.
The following options will be on the Substream
Setup screen:
Channel – drop list to select the
particular channel to configure. When
a
channel
is
selected,
the
corresponding recording settings for
that channel will be displayed for
viewing and editing.
Enable – checkbox, if selected, would
enable the substream recording for
this channel. If unselected, would mean
that video from this channel would not
be recorded and stored as part of the
substream.
Audio – checkbox, if selected, would
include audio into the recording. If
Содержание Fleet Safety, Security and Tracking Solutions...
Страница 138: ...G4 304SD1 User Manual Install Guide 138 of 149 9 Hardware Installation 9 1 Quick Reference Guide for Installation...
Страница 143: ...G4 304SD1 User Manual Install Guide 143 of 149 Figure 9 3 Basic Analog IP...
Страница 144: ...G4 304SD1 User Manual Install Guide 144 of 149 Figure 9 4 G4 304SD1 Wiring with Wireless...