G4-304SD1
User Manual & Install Guide
10 of 149
LED
Description
PWR
Illuminated blue indicates the device is powered.
USB
Illuminated green indicates that the device is connected.
ALM
Illuminated red indicates that a sensor has triggered an alarm.
REC
Illuminated green indicates that the device is recording.
ERR
Illuminated orange indicates for hardware error.
NET
Illuminated green indicates network connection is available.
(Note: The LAN LED status light is currently not supported)
Figure 2-3 Rear View of the G4-304SD1
A. GPS Antenna In: This is the connection point for the external GPS antenna. If there is no GPS
antenna attached, this port should be covered with a rubberized cap.
B. Four analog camera connectors.
C. Serial/Sensor cable (CAB000376) connection.
D. A/V Out port. Use CAB000390.
NOTE: Only used at setup.
E. IP Camera connector. Use CAB000377.
F. Power In: This is the power input port for the device.
Содержание Fleet Safety, Security and Tracking Solutions...
Страница 138: ...G4 304SD1 User Manual Install Guide 138 of 149 9 Hardware Installation 9 1 Quick Reference Guide for Installation...
Страница 143: ...G4 304SD1 User Manual Install Guide 143 of 149 Figure 9 3 Basic Analog IP...
Страница 144: ...G4 304SD1 User Manual Install Guide 144 of 149 Figure 9 4 G4 304SD1 Wiring with Wireless...