Gatekeeper Systems CartManager HD, Руководство полевого техника

Страница: 35 / 60

CartManager XD Field Technician Guide Page 32
CartManager XD Safety Guidelines
Note:
The following guidelines are suggested practices for safely performing repairs on the CartManager XD and
are designed to protect both the technician and the public at large. The safety guidelines are not meant to be a
replacement for good maintenance practices or common knowledge.
Guidelines:
1. Always move the CartManager XD to safe location away from pedestrian traffic, flammable hazards or
explosive gasses. If unit is not operable, pull brake rod out and disengage motor brake. You should now
be able to push unit to safe location.
2. Repair work should never be performed on wet, slippery, or unleveled surface.
3. If repair location is not far enough away from pedestrian traffic, erect barricade utilizing orange cones
and/or safety tape to keep pedestrians at a safe distance.
4. Raise and lower hood using hood handles to prevent pinching of fingers or hands.
5. If the repair requires working with battery connections or batteries, the service technician should wear
appropriate eye protection and face protection should unexpected release of acid occur.
6. Do not open the sealed maintenance-free batteries.
7. If exchange of batteries is required, follow the manufacturer’s safety guidelines for the safe handling,
storage, transportation and disposal of batteries.
8. Before removing electrical parts for replacement, technician must first remove positive (red) connections
from battery to prevent accidental shock or grounding of electrical system or unexpected movement of
unit.
9. Service work should only be performed by authorized and trained technicians that have read and
understand operations manual and safety guidelines. Technician should be familiar with safety aspects of
the CartManager XD such as, Emergency Stop Button and Brake Rod. Technician should not wear loose
clothing, ties, jewelry, rings or watches with metal bands when repairing the CartManager XD.
10. If repair requires tipping of unit or turning unit upside down, batteries should be removed and placed in
safe location. Be sure to replace wooden blocks and battery strap when installing batteries.
11. If diagnostic testing of electrical system is required, pull brake lever to prevent accidental engaging of
drive motor.
12. If diagnostic testing of drive unit is required, before beginning test, frame should be blocked so that drive
wheels do not make contact with ground. Block in photo on the following page were made from two 2” x
4”s and one 1”x 4” s, 12” inches in length, that are joined together using screws.