3
Standing up using the Bure Rise & Go
2
4
1
3
Because standing up or transporting patients always entails risks we recommend that
two people are always present to assist the user at such times.
1. Fit the harness as low as possible
across the hips and bottom with the
broad upper part around the hips
and the narrow lower part around
the bottom. Attach the strap with the
Velcro fastener and tighten it using the
steplessly adjustable safety belt. Note
that the lower part of the harness at-
tached around the patient’s bottom can
be opened as required, e.g. for visits to
the WC.
2. Place the user’s legs at a 90˚ angle with
their feet on the floor or platform. Adjust
the shin supports to fit the user’s shins;
remember to avoid pressure on the
patellae and patellar tendons. Refer to
page 5 for shin support adjustment.
3. Thread both attachment belts through
the walker’s frame and the green
locking devices. Make sure the belts
are threaded completely through the
locking devices. NB! Check especially
that the belts are undamaged.
4. Connect the power rise harness and
attachment belts (that are secured to
the walker) and tighten them using the
loops; the belts must be taught on both
sides.