EN
79
Controlling the Baking Cycle Manually’). After removing the baked items, you may
start the baking time again via the restart button.
IMPORTANT -
Please consider that the program “CUSTOM” may not give any
signal for the end of baking. You must monitor the baking cycle by yourself and
keep an eye on the baking time shown on the LCD display.
7 BROWNING LEVELS
The browning is displayed in the upper part of the LCD display via 7 dashes: from
“LIGHT” to “DARK”. You select the browning via the browning control dial at the
right side of the LCD display. Turn the browning control dial until the desired brow-
ning is displayed via the appropriate number of dashes.
NOTE
You control the temperature of the waffle plates via the browning. Therefore, when
baking a batter with high contents of sugar or other heat-sensitive ingredients, it
may be better to use a light browning level and a program with long baking time.
TEXTURE FUNCTIONS
You may select one of two texture functions for getting the desired consistency of your
waffles, generating a crisp exterior with moist (and soft) interior or getting uniform
texture. Press the texture button on the control panel for toggling between the texture
functions. The selected function is shown on the LCD display above the baking time.
The »Design Waffle Maker« offers 2 texture functions for selecting the consistency
of your waffles: „CRISP EXTERIOR MOIST INTERIOR“ and „UNIFORM TEXTURE“.
NOTE
The texture function has no influence, when using manual control (“CUSTOM”).
RESTART FUNCTION
You can start a baking cycle by pressing the restart button.
NOTE
The appliance detects the cold batter on the waffle plates. When baking your waf-
fles via a pre-defined program, the baking cycle is started automatically by closing
the lid. However, with the manual control („CUSTOM“) it may be required to start
the baking cycle manually via the restart button.
Содержание WAFFLE IRON ADVANCED CONTROL
Страница 119: ......