Velox to G-Shield Fire Upgrade Kit Instructions
6
Version 3
P/N 761011-02
7. Touchscreen display software upgrade procedure
The USB cable supplied in the upgrade kit is sufficient to provide power and
communications to the touchscreen display. No external power is required.
Note
:
The touchscreen display uses an embedded operating system and application software to
connect to the G-Shield Fire gas detection hardware.
Note
:
Figure 8. USB connected to touchscreen.
Figure 9. Touchscreen DisplayDeviceUtility connected devices screen.
Download the Velox to G-Shield Fire Upgrade Kit software from
https://gastech.com/g-shieldfire
Select the downloads tab and choose the file
84-1011-01 Software Package.zip
Step 1.
Unzip the files to a convenient location.
Step 2.
Connect the USB cable from the upgrade kit to the USB port on the touchscreen..
Step 3.
Connect the USB cable to a windows PC and run the application
DisplayDeviceUtility.exe. The touchscreen will turn on automatically and the application
will show this screen.
Step 4.
Check the software version currently installed in the touchscreen. The Software
version must be 4.0.2.4064. If it is already 4.0.2.4064 skip to Section 9.
Step 5.
