GasTech D-Guard2, Инструкция по эксплуатации

Страница: 51 / 59

D-Guard² Instruction Manual
Item Number 201018 51
Parameter Description Limits
Measurement technique Electro chemical cell, infra-red
Target gas See section 24.5
Full scale range See section 24.5
Maximum loop current Under any condition 25 mA
Minimum supply voltage General, Relay and Siren versions 13 V
Maximum loop resistance At a supply voltage of 22 V 380 Ω
Maximum supply voltage General, Relay and Siren versions 28 V
Loop error signal Isolated or fault 3.5 mA
Loop error signal Over range 21 mA
Display Graphical display 400x240 pixels
24.3 General Specifications
Figure 29. D-Guard² General Specifications.
24.4 Wiring Requirements
Make sure the cable is suitable for the application. The outside diameter of the cable
sheath must be between 10 mm and 14 mm.
Figure 30. D-Guard² electrical connections.