8
IMPORTANT
• Do not smoke when attempting to ignite
appliance.
• Always use protective gloves when handling
hot components.
• Do not smoke at any time when attempting
to ignite the appliance burners.
•
CAUTION: Do not move the appliance while
in operation.
• Do not leave the appliance unattended
when alight.
• Before connecting and disconnecting appliance
to gas source, make sure burner controls are
in ‘OFF’ position.
ASSEMBLY
Review the contents of the package. Make sure all
listed components are included. These parts are fully
assembled. Text below is for reference, except for
point 4.
1. To attach centre trivet (PIC. 1) use supplied
screw and nut assembly. Attach legs and corner
trivets to frame using supplied screws, taking care
to align the internal thread in leg assembly (PIC. 2).
2. Align the gas control assembly at the end
of the burner tube and then secure with screws
(PIC. 3).
3. Ensure that Primary Air Disc is located close to
the burner tube opening. These parts are fully
assembled images below are for reference.
4. Attach the L.P. Gas hose to the Gas Valve Assembly
using a spanner – Do Not Over Tighten. Leak check
with soapy water before use.
PIC. 3
PIC. 3
PIC. 2
PIC. 1
Corner Trivets
Centre Trivet (Twin Burner Only)
