background image

6

During operation if it is noted that the burner flame  
is unstable, is changing colour from blue to yellow  
or has a distinct smell it is important that you contact 
SITRO Group for your local authorised gas appliance 
repairer for inspection. 
Periodically check the gas control is tight and has  
no leaks, follow the testing for leaks procedure.  
Check the gas connection and regulator for any signs 
of wear or damage, if identified contact customer 
service for a replacement assembly immediately.
For further information or assistance please contact 
Customer Service on 1300 174 876 between the hours 
of Monday to Friday 8.00am – 5.00pm EST or email  
[email protected]

SPILLAGE

Turn off the cylinder gas valve. Wait for the flame  
to go out. Using heat proof gloves:
•  Remove cooking pan. 
•  Blow liquid from burner ports.
•  Tip burner upside down to drain spilled liquid. 
•  Once dry re-position. 
•  Follow lighting procedures to re-light burner  

and continue cooking.

CARE & MAINTENANCE

Problem

Possible Reason

Solution

Burner will not ignite

Valve on gas bottle closed

Open valve on gas bottle

Control knob is closed

Turn knob onto high when lighting

Food is not cooking  
or is taking too long

Burner has gone out

Check that the gas bottle is not 
empty and re-ignite burner

Primary air disc is open to far

Wind closer to burner tube

TROUBLE SHOOTING

Содержание CS2134SL













Отзывы: