3
IMPORTANT
• Use outdoors only.
• Keep children away at all times.
• CAUTION: Accessible parts may be very hot.
Please take care when handling or moving
the appliance.
• Appliance is to be used on a stable, level, flat,
non-flammable surface. The appliance should
be protected from direct drafts and in a well
ventilated place.
• Only cooking vessels with a minimum diameter
of 200mm and a maximum of 300mm are
to be used with this appliance.
• This appliance shall only be used in an above
ground open air situation with natural ventilation,
without stagnant areas, where gas leakage
and products of combustion are rapidly
dispersed by wind and natural convection.
• Take care that the primary air intakes, located
on the burner tube of this appliance are
not obstructed, or that air flow is restricted
by placing items or other appliances close
to or adjacent to the inlets.
• If there is a leak on your appliance (smell
of gas), immediately attempt to turn off
the cylinder valve. Remove the appliance
to a well-ventilated location away from any
ignition source. Check for leaks using soapy
water. Do not try to detect leaks using a flame.
• Do not attempt to move or relocate the
appliance when it is operating, extinguish
the burner and allow to cool, disengage
the gas cylinder then move the appliance.
CHECKING FOR GAS LEAKS
• Check that all connections are tight and that
the gas cylinder connection has been tightened
before you turn the cylinder gas valve on.
• NEVER check for leaks with a flame
or pilot light.
• Using Gas Leak Detection Spray or soapy
water, coat all connections, if bubbles appear
turn the cylinder gas control off and retighten
the connection before re-testing.
• Inspect the appliance regularly for signs of wear,
leaks or incorrect operation.
If symptoms such as flaring of the burner, issues
with lighting, damages to hoses or connections
or leaks from seals or gas controls are identified
do not attempt to repair, return to your authorised
stockist for service and maintenance.
CHANGING GAS CYLINDER
• To check if gas remains in the cylinder,
disconnect from the appliance and hold
the cylinder in a vertical position then shake
from side to side, if there is a sound or feel
of liquid movement inside, the cylinder
contains gas.
• When changing gas cylinders ensure this
is conducted outside in a well- ventilated
location free from people, animals and ignition
sources such as naked flames, pilot lights and
electrical equipment with heaters or elements.
