10
IMPORTANT
CAUTION:
When the appliance is not in use,
the gas must be turned off at the cylinder.
Check that the seals between the appliance
and the gas cylinder are in place and in good
condition before connecting the gas cylinder.
Do not use this appliance if it has damaged
or worn seals.
• Beware of spiders and wasps. Burner tube
should be inspected and cleaned periodically.
• This appliance must only be serviced
by an authorised person.
NOTE: ONLY USE ON A NON-COMBUSTIBLE
SURFACE
TURNING THE APPLIANCE
OFF
If the appliance is no longer to be used and to reduce
the risk of blocked gas jets caused by excess gas
being left in the hose, all remaining gas must be
expelled from the hose assembly.
1. With the flame still operating, turn the valve on
the gas cylinder in the clockwise (PIC. 8) direction
until it is off. Allow the flame to burn down then
extinguish once all remaining gas in the hose has
been used.
2. Turn the gas controls on the appliance clockwise
to the “OFF” position (PIC. 9).
3. Gas valve “OFF”. The gas lever
is at right angles to the gas valve
and the venturi tube.
PIC. 9
PIC. 9
PIC. 8
