MDE-4334C Atlas Start-up and Service Manual · April 2008
Page 5-3
Programming Overview
Pump Programming
Figure 5-1: Electronic Commercial Display
Atlas
TURN OFF ENGINE
Electronic Retail Units
The 8800 Series electronics perform with options such as sale control, totals maintenance,
preset, Automatic Temperature Compensation (ATC) functions, electro-mechanical totalizers,
and others. External communication utilizes a proprietary two-wire communication system,
that is used or can be used by a host of Point of Sale (POS)/controllers as manufactured by
Gasboy, Gilbarco, Ruby Verifone, Allied, and other manufacturers. Interface devices for
communication such as a Gilbarco PAM 1000 can also be used to convert the two-wire
communication to a usable format for other POS manufacturers who cannot connect directly
to the two-wire system.
Programming of the Electronic Retail units is accomplished using three levels of command
codes:
• Level 1 codes are potentially used by station personnel but also useful at times, during
service.
• Level 2 codes are higher level codes typically intended for the ASC in programming the
unit for desired operation.
• Level 3, the highest level is reserved for unit configuration and changing Personal
Identification Number (PIN) codes. All levels require entry of a PIN code before access.
These codes can be changed for station security. However, losing the codes will require a
master reset of the unit and reprogramming. Most codes have a default setting.
Figure 5-2: Electronic Retail Display
Atlas
TURN OFF ENGINE
Total Sale
Gallons
Total Sale
Gallons