![background image](http://html1.mh-extra.com/html/gasboy/atlas/atlas_service-manual_3684436033.webp)
Improperly installed or maintained equipment can create a hazard.
Improperly installed or maintained equipment could cause a fire, explosion, or electrical shock.
For any component not supplied by Gasboy Atlas (for example, hoses and nozzles), consult and
follow the installation and maintenance instructions provided by the manufacturer.
CAUTION
MDE-4334C Atlas Start-up and Service Manual · April 2008
Page 4-5
Replacements and Adjustments
Preventive Maintenance and Inspection
Replacements and Adjustments
Filter Strainer Replacement
If the unit is equipped with a strainer and filter, check and change it at regular intervals
(
). A dirty strainer and/or filter in a pump or remote
dispenser will cause a slower delivery rate. Refer to the accessories section of your parts
manual to ensure that you replace the strainer and filter required with the one designed for
your model. Always use a drip pan and absorbent material directly below the filter when
removing the cartridge, to prevent contamination of both the soil and the electrical
components within the cabinet. This service must not be performed by untrained individuals.
Special Setup Required for Aircraft Fueling
Aircraft require finely filtered fuel.
Improperly filtered fuel could cause the engine to fail.
Do
not
use Gasboy Atlas pumps/dispensers without auxiliary filters, separators,
and other equipment necessary to ensure product purity, for direct fueling of the
aircraft.
CAUTION
Adjusting the Belts (Suction Pumps only)
With proper care, belts will give exceptionally good service. A loose belt not only cuts down
dispensing speed due to slipping, it also results in excessive wear. Refer to
in this manual. This service must not be performed by
untrained individuals.