GAS GC-IMS-SILOX Скачать руководство пользователя страница 11

Страница: 11 / 145

Safety

2.1

Intended Usage Only

Usage other than described in this manual may damage the device

and/or harm persons involved. Do not use the device for other

purposes. Damages due to misuse are not covered by the guarantee.

Such damage claims will be rejected.

2.2

Responsibilities of the Operator

The device should only be operated in a perfect technical condition. Before

putting the device into operation the condition of the device and its equipment

must be checked. The information and instructions provided in this manual must

be followed at all times.

Besides the instructions provided in this manual the local rules for the

prevention of accidents, general safety regulations - valid for the area of

application of the device - as well as the valid environment protection

regulations must be considered and respected.

Responsibilities of the involved persons regarding installation, operation,

maintenance and cleaning must be made clear.

Only authorized and trained personnel may operate the equipment. The

operators must know potential dangers and how to avoid them and should be

regularly trained on safety procedures and environmental protection

regulations.

Содержание GC-IMS-SILOX


















































































































































Результаты поиска

Содержание GC-IMS-SILOX

Отзывы:

Бренды по названию

Популярные бренды

GAS GC-IMS-SILOX, Руководство пользователя

Результаты поиска

Содержание GC-IMS-SILOX

Отзывы:

Бренды по названию

Популярные бренды