GAS GAS SM 700 2023, Руководство пользователя

Страница: 80 / 128

14 ELECTRICAL SYSTEM
78
14.1 Removing the 12-V battery
Warning
Risk of injury Battery acid and battery gases cause serious chemical burns.
–
Keep 12 V batteries out of the reach of children.
–
Wear suitable protective clothing and safety glasses.
–
Avoid contact with battery acid and battery gases.
–
Keep sparks or open flames away from the 12 V battery.
–
Only charge 12 V batteries in well-ventilated rooms.
–
Rinse the affected area immediately with plenty of water in the event of contact with the skin.
–
Rinse eyes with water for at least 15 minutes and consult a doctor immediately if battery acid and battery
gases get into the eyes.
Preparatory work
–
Open the fuel tank filler cap. ( p. 19)
–
Remove the seat. ( p. 49)
V02748-10
Main work
–
Remove screws
1
.
–
Push the retaining bracket toward the rear and remove it.
–
Take off positive terminal cover
2
.
–
Disconnect negative cable
3
from the 12-V battery.
–
Disconnect positive cable
4
from the 12-V battery.
–
Lift out the 12-V battery.
Info
Never operate the motorcycle with a discharged 12-V bat-
tery or without a 12-V battery. In both cases, electrical com-
ponents and safety devices can be damaged. The vehicle will
therefore no longer be roadworthy.
14.2 Installing the 12-V battery
V02749-10
Main work
–
Insert the 12-V battery into the battery compartment with the ter-
minals facing to the rear.
12-V battery (YTZ10S) ( p. 111)