GAS GAS SM 700 2023, Руководство пользователя

Страница: 52 / 128

11 SERVICE WORK ON THE CHASSIS
50
11.12 Mounting the seat
V02715-10
–
Hook the seat using holding lugs
1
on to bushings
2
, lower the
seat at the rear and push it forward.
–
Push locking pin
3
into lock housing
4
and push the back of the
seat down until the locking pin locks in place with an audible click.
–
Check that the seat is correctly mounted.
11.13 Removing the tool set
Preparatory work
–
Open the fuel tank filler cap. ( p. 19)
–
Remove the seat. ( p. 49)
V02730-10
Main work
–
Take the hexagon socket wrench for loosening and mounting
screws
1
from bracket
A
on the underside of the seat.
–
Remove screws
1
.
–
Take off the left side cover.
V02761-10
–
Open the tool set compartment and take out tool set
2
.