GAS GAS MC-E 5 Скачать руководство пользователя страница 25

Страница: 25 / 104

RIDING INSTRUCTIONS 9

9.1

Checks and maintenance measures when preparing for use

Info

Before every trip, check the condition of the vehicle and ensure that it is safe to operate.

The vehicle must be in perfect technical condition when it is being operated.

H03808-01

–

Check the throttle grip, both magnetic switches, Powerpack LV, mul-
tifunctional element, and electric motor for external damage.

–

Check the front brake fluid level. (

p. 60)

–

Check the rear brake fluid level. (

p. 67)

–

Check the front brake linings. (

p. 63)

–

Check the brake linings of the rear brake. (

p. 69)

–

Check that the brake system is functioning properly.

–

Check the chain for dirt. (

p. 52)

–

Check the chain, rear sprocket, motor sprocket, and chain guide.
(

p. 55)

–

Check the chain tension. (

p. 53)

–

Check the tire condition. (

p. 76)

–

Check tire pressure. (

p. 77)

–

Check the spoke tension. (

p. 77)

Info

The spoke tension must be checked regularly as incorrect
spoke tension will strongly impair riding safety.

–

Clean the dust boots of the fork legs. (

p. 43)

–

Bleed the fork legs. (

p. 42)

–

Check the settings of all controls and ensure that they can be oper-
ated smoothly.

–

Check the tightness of the easily accessible, safety-relevant screws
and nuts.

–

Check the charging level of the Powerpack LV.

9.2

Starting the vehicle

402581-10

–

Remove plug-in stand

–

Press and hold the On/Off button until the multifunctional element
lights up.

The vehicle is in standby mode.

Содержание MC-E 5









































































































Результаты поиска

Содержание MC-E 5

Отзывы:

Похожие инструкции для MC-E 5

Бренды по названию

Популярные бренды

GAS GAS MC-E 5, Руководство пользователя

Результаты поиска

Содержание MC-E 5

Отзывы:

Похожие инструкции для MC-E 5

Бренды по названию

Популярные бренды