GAS GAS MC 85 2023, Руководство пользователя

Страница: 45 / 176

SERVICE WORK ON THE CHASSIS 11
43
S04327-10
–
Loosen screws
3
. Remove the left fork leg.
–
Loosen screws
4
. Remove the right fork leg.
11.6 Installing the fork legs
H02312-11
–
Position the fork legs.
Air bleeder screw
1
of the right fork leg is positioned to the
front.
Valve
A
of the left fork leg faces the front.
Info
The second milled groove (from the top) must be flush with
the upper edge of the upper triple clamp.
The air suspension is located in the left fork leg. The pres-
sure and rebound damping is located in the right fork leg.
S04327-11
–
Tighten screws
2
.
Guideline
Screw, top triple clamp M8 17 Nm (12.5 lbf ft)
–
Tighten screws
3
.
Guideline
Screw, bottom triple
clamp
M8 15 Nm (11.1 lbf ft)
H00935-15
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Change front wheel bearing.
–
Clean and grease shaft seal rings
4
and contact surfaces
B
of the
spacers.
Long-life grease ( p. 119)
–
Insert the spacers.
S04328-10
–
Clean and grease the wheel spindle.
Long-life grease ( p. 119)
–
Position the front wheel.
–
Insert the wheel spindle.
–
Mount and tighten screw
5
.
Guideline
Screw, front wheel
spindle
M20x1.5 35 Nm (25.8 lbf ft)