GAS GAS MC 450F 2022, Руководство пользователя

Страница: 118 / 157

16 TUNING THE ENGINE
116
102246-10
–
Remove guide plate
4
from handle tube
5
.
–
Position the required guide plate on the grip tube.
Guideline
The label OUTSIDE must be visible. Marking
A
must be posi-
tioned at marking
B
.
Black guide plate (79002014100)
Alternative 1
Grey guide plate (79002014000)
Info
The gray guide plate opens the throttle valve more slowly.
The black guide plate opens the throttle valve more quickly.
The black guide plate is already mounted when the vehicle is
delivered.
A00850-10
–
Clean the outside of the handlebar and the inside of the grip tube.
Mount the grip tube on the handlebar.
–
Attach the throttle cables to the guide plate and route correctly.
–
Position half-shells
3
, mount and tighten screws
2
.
Guideline
Screw, throttle grip M6 5 Nm (3.7 lbf ft)
–
Slide on sleeve
1
and check the throttle grip for ease of move-
ment.
Finishing work
–
Check the play in the throttle cable. ( p. 114)
16.4 Changing the mapping
Info
The desired engine characteristic can be activated via the MAP button on the combination switch.
The setting most recently selected is activated again when restarting.
The traction control can also be activated in each mapping using the TC button.
The mapping can also be changed during the ride.
H02889-01
Activating STANDARD mapping:
–
Press button MAP until LED 1 lights up.
Guideline
Engine speed < 4,000 rpm
STANDARD
–
balanced response