GAS GAS MC 450F 2021, Руководство пользователя

Страница: 110 / 142

17 SERVICE WORK ON THE ENGINE
108
G05110-10
Condition
The engine is cold.
–
Check the engine oil level.
The engine oil reaches the middle of level viewer
A
.
» If the engine oil does not reach the middle of the level
viewer:
–
Add engine oil. ( p. 111)
Condition
The engine is at operating temperature.
–
Check the engine oil level.
Info
After switching off the engine, wait one minute before
checking the level.
The engine oil level is between the middle of the level
viewer
A
and the upper edge of the level viewer
B
.
» If the engine oil does not reach the middle of level
viewer
A
:
–
Add engine oil. ( p. 111)
17.3 Changing the engine oil and oil filter, cleaning the oil screens
Warning
Danger of scalding Engine and gear oil get very hot when the motorcycle is ridden.
–
Wear suitable protective clothing and safety gloves.
–
In the event of scalding, rinse the area affected immediately with lukewarm water.
Note
Environmental hazard Hazardous substances cause environmental damage.
–
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance with the appli-
cable regulations.
Info
Drain the engine oil while the engine is at operating temperature.
Preparatory work
–
Park the motorcycle on a level surface.
S02287-10
Main work
–
Position an appropriate container under the engine.
–
Remove oil drain plug
1
with the magnet and seal ring.