GAS GAS MC 250F FACTORY EDITION 2023, Руководство пользователя

Страница: 17 / 148

CONTROLS 6
15
6.5 Start button
F03650-10
Start button
1
is fitted on the right side of the handlebar.
Possible states
• The start button is in the basic position
• The start button is pressed
–
In this position, the starter motor is
actuated.
6.6 Combination switch
F03761-10
The combination switch is fitted on the left side of the handlebar.
Possible states
1 STANDARD
–
STANDARD mapping is activated when the
indicator lamp
A
lights up.
1 TC STANDARD with TC
–
STANDARD mapping with traction
control is activated when the indicator lamp
A
and the
TC indicator lamp light up.
2 ADVANCED
–
ADVANCED mapping is activated when the
indicator lamp
B
lights up.
2 TC ADVANCED with TC
–
ADVANCED mapping with traction
control is activated when the indicator lamp
B
and the
TC indicator lamp light up.
The engine characteristic can be changed using button
1
and but-
ton
2
on the combination switch.
Traction control can be activated using the TC button
3
on the combi-
nation switch.
Launch control and the quickshifter can also be activated using the com-
bination switch.
6.7 Overview of indicator lights
F03758-10
Possible states
Malfunction indicator lamp lights up/flashes orange
–
The
OBD has detected a malfunction in the vehicle electronics.
The malfunction indicator lamp also lights up if traction
control is activated and the speed limiter intervenes.
TC indicator lamp lights up orange
–
TC is enabled or is
currently intervening. The TC indicator lamp flashes if
launch control is activated.
QS indicator lamp lights up blue
–
The quickshifter is acti-
vated. The QS indicator lamp flashes when the quickshifter
is being programmed.
Indicator lamp
A
lights up white
–
STANDARD mapping is
activated.
Indicator lamp
B
lights up green
–
ADVANCED mapping is
activated.