GAS GAS MC 250F 2022, Руководство пользователя

Страница: 48 / 143

11 SERVICE WORK ON THE CHASSIS
46
–
Press the dust boots back into their installation position.
–
Remove excess oil.
Finishing work
–
Install the fork protector. ( p. 46)
–
Remove the motorcycle from the lift stand. ( p. 44)
11.5 Removing the fork protector
A00777-10
–
Remove screws
1
and take off the clamp.
–
Remove screws
2
and take off the left fork protector.
–
Remove screws
3
and take off the right fork protector.
11.6 Installing the fork protector
A00777-11
–
Position the fork protector on left fork leg. Mount and tighten
screws
1
.
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
–
Position the brake line and the clamp. Mount and tighten
screws
2
.
Guideline
Screw, brake line
holder EJOT 1.7 Nm (1.25 lbf ft)
–
Position the fork protector on the right fork leg. Mount and tighten
screws
3
.
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
11.7 Removing the fork legs
Preparatory work
–
Raise the motorcycle with a lift stand. ( p. 44)
–
Remove the front wheel. ( p. 88)