11 SERVICE WORK ON THE CHASSIS
46
M01117-10
–
Remove O-ring
3
. Remove protective ring
4
.
–
Take off the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
11.10
Installing the lower triple clamp
102146-10
Main work
–
Clean the bearing and sealing elements, check for damage, and
grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount upper
steering head bearing.
–
Check whether upper steering head seal
1
is correctly positioned.
–
Slide on protective ring
2
and O-ring
3
.
S04531-10
–
Position the upper triple clamp with the handlebar.
–
Mount screw
4
, but do not tighten yet.
H01182-11
–
Position the fork legs.
Air bleeder screw
5
of the right fork leg is positioned to the
front.
Valve
A
of the left fork leg faces the front.
Info
The air suspension
AER
valve is located in the left fork leg.
Grooves are milled into the side of the upper end of the fork
legs. The second milled groove (from the top) must be flush
with the upper edge of the upper triple clamp.
