GAS GAS 3215013en Скачать руководство пользователя страница 76

Страница: 76 / 150

12 SERVICE WORK ON THE CHASSIS

12.36

Checking the frame

F03218-01

–

Check the frame for damage, cracking, and deformation.
» If the frame shows signs of damage, cracking, or deformation:

–

Change the frame.
Guideline

Repairs on the frame are not permitted.

12.37

Checking the link fork

F03219-01

–

Check the link fork for damage, cracks, and deformation.
» If the link fork shows signs of damage, cracks, or deformation:

–

Change the link fork.
Guideline

Repairs on the link fork are not permitted.

12.38

Checking the throttle cable routing

Preparatory work

–

Remove the seat. (

p. 60)

–

Remove the fuel tank.

(

p. 66)

F03220-01

Main work

–

Check the throttle cable routing.

Both throttle cables must be routed, side by side, on the back of
the handlebars and above the fuel tank bracket, to the throttle
valve body. Both throttle cables must be secured behind the rub-
ber strap of the fuel tank support.

» If the throttle cable is not routed as specified:

–

Correct the throttle cable routing.

Finishing work

–

Install the fuel tank.

(

p. 67)

–

Mount the seat. (

p. 60)

Содержание 3215013en























































































































































Результаты поиска

Содержание 3215013en

Отзывы:

GAS GAS 3215013en, Руководство пользователя, Страница: 76 / 150

Результаты поиска

Содержание 3215013en

Отзывы: