Garudan GPS/G-10060, Руководство пользователя

Страница: 54 / 69

ANITA ©
MP00006EN_181206 54
53 Label device close time (ms)
0 to 1020 Parameter is active when parameter 06 Feed plate type is set to value 3 Label
device . This parameter is time delay necessary for moving label device in
horizontal direction (from left to right and from right to left). (default value
300)
54 Label device up time (ms)
0 to 1020 Parameter is active when parameter 06 Feed plate type is set to value 3
Label device . This parameter is time delay necessary for moving label device
in horizontal direction (from left to right and from right to left). (default value
100)
55 Thread clam stitches count Optional device is possible only on machines GPS/H series.
-1 Thread clamp device is not on machine. (default value)
0 Thread clamp device is on machine, but it is disabling. Device finds zero
position after switch on of machine only.
1 to 10 Thread clamp device is on machine and it is active. Device finds zero position
after switch on of machine. The parameter means count of stitches held the
thread after start of sewing.
56 Thread clam timing
-100 to 100 Parameter is active only when parameter 55 Thread clam stitches count is
set from 1 to 10. Parameter set position of needle for catching the thread.
57 Mode of Pause code
0 Both upper When machine stop sewing on pause command, both feed plates will be
moved to upper position.
1 Left bottom When machine stop sewing on pause command, right feed plate will be
moved to upper position and left feed plate will stay in bottom position.
2 Right bottom When machine stop sewing on pause command, left feed plate will be moved
to upper position and right feed plate will stay in bottom position.
3 Both bottom When machine stop sewing on pause command, both feed plates will stay in
bottom position.
58 Style of pattern open
0 Numbers Older version of patterns opening interface.
1 Characters Newer version of patterns opening interface (default).
59 Edit password
0 to 99999999 Password for access to pattern programming. Access to test interface and
parameters are denied. (default 110585)
www.garudan.cz