GARO LS4 MINI 43kW, Руководство по сборке

Страница: 3 / 19

INFORMATION
Warnings About this manual
GARO LS4 MINI is an EVSE station for Mode-3 AC charging up
to 43kW.
Below are some example of standard features:
• Fixed cable for Mode-3 EV charging.
• Suitable for installation on wall or ground stand.
• LED status indication.
• Upgradeable firmware*
• Visible energymeter
• OCPP via 4G or LAN*
• RFID reader for secure authorization (not activated as default)*
LS4 MINI supports following features:
• External DLM energy meter*
• Cluster installation of multiple LS4 MINI via Ethernet*
• Cluster installation of multiple LS4 MINI, LS4 and GLB+ via
Ethernet*
* Require certified technician
Dielectric Voltage Withstand Test is not allowed on
LS4 MINI
This equipment should not be used by anyone (including
children) with reduced physical, sensory or mental
capacity, or anyone lacking in experience or knowledge,
unless they are provided with supervision or prior
instruction in how to use the equipment by the person
responsible for their safety.
LS4 MINI is designed exclusively for charging electric
vehicles.
LS4 MINI must be grounded according to local country
installation requirements.
Do not install or use the LS4 MINI near flammable,
explosive, harsh, or combustible materials, chemicals, or
vapors.
Turn off the electrical power at the circuit breaker before
installing, configuring, cleaning or maintenance.
Use LS4 MINI only within the specified parameters.
Never spray water or any other liquid directly at LS4
MINI. Never spray any liquid onto the charge handle or
submerge the charge handle in liquid. Store the charge
handle in the dock to prevent unnecessary exposure to
contamination or moisture.
Do not use this equipment if it appears to be damaged or
if the charging cable appears to be damaged.
Do not modify the equipment installation or any part of the
product.
Do not touch the terminals with fingers or any other
objects.
Do not insert foreign objects into any part of LS4 MINI
INFORMATION
This document contains general descriptions which are verified to
be accurate at the time of printing. However, because continuous
improvement is a goal at GARO, we reserve the right to make
product and software modifications at any time. This range is
subject to continual product development. Errors, typos and
omissions excepted. Latest manuals can always be found at
https://www.garo.se
3
EN