Garmin Volvo Penta Glass Cockpit B12, Руководство пользователя

Страница: 41 / 106

Converting a Track to a Boundary
Before you can convert a track to a boundary, you must
record and save at least one track (
Saving the Active
Track , page 27 ).
1 Select Info > User Data > Tracks > Saved Tracks .
2 Select a track.
3 Select Review > Edit Track > Save as Boundary .
Editing a Boundary
1
Select Info > User Data > Boundaries .
2 Select a boundary.
3 Select Review .
4 Select an option:
• To edit the appearance of the boundary on the
chart, select Display Options .
• To change the boundary lines or name, select Edit
Boundary .
• To edit the boundary alarm, select Alarm .
Linking a Boundary to a SmartMode Layout
You can link a boundary to a SmartMode layout to
automatically open the layout when entering or exiting the
boundary. For example, you can set a boundary around
your marina, and automatically open the Docking layout
when you approach the marina.
1 Select Info > User Data > Boundaries .
2 Select a boundary.
3 Select Review > Link SmartMode™ > SmartMode™ .
4 Select Entering , and select a layout.
5 Select Exiting , and select a layout.
Setting a Boundary Alarm
Boundary alarms alert you when you are within a
specified distance of a set boundary. This can be helpful
when attempting to avoid certain areas or when you
should be very alert in certain areas, such as shipping
lanes.
1 Select Info > User Data > Boundaries .
2 Select a boundary.
3 Select Review > Alarm .
4 Select an option:
• To set an alarm for when your boat is a specified
distance from the boundary, select Warning Dist. ,
enter a distance, and select Done .
• To set an alarm for when you enter or exit an area
boundary or a circle boundary, select Area to show
Entering or Exiting .
Disabling all Boundary Alarms
Select Info > User Data > Boundaries > Alarms .
Deleting a Boundary
1
Select Info > User Data > Boundaries .
2 Select a boundary.
3 Select Review > Edit Boundary > Delete .
Deleting All Saved Waypoints, Tracks,
Routes, and Boundaries
Select Info > User Data > Delete User Data > Delete
All User Data > OK .
Sailing Features
Setting the Vessel Type for Sailing Features
You must select a sailing vessel type to use the sailing
features.
1 Select Settings > My Vessel > Vessel Type .
2 Select Sailboat or Sailing Catamaran .
Sail Racing
You can use the device to increase the likelihood that
your boat will cross the start line of a race exactly when
the race begins. When you synchronize the race timer
with the official race countdown timer, you are alerted at
one-minute intervals as the race start approaches. When
you combine the race timer with the virtual start line, the
device measures your speed, bearing, and remaining time
on the countdown timer. The device uses this data to
indicate whether your boat will cross the start line before,
after, or at the correct time to start the race.
Starting Line Guidance
Sailing start line guidance is a visual representation of the
information you need to cross the start line at the optimal
time and speed.
After you set the starboard and port start line pins, and
the target speed and time, and after you start the race
timer, a predictor line appears. The predictor line extends
from your current location toward the start line and the
laylines that extend from each pin.
The end point and color of the predictor line indicate
where the boat will be when the timer expires, based on
your current boat speed.
When the end point is before the start line, the line is
white. This indicates the boat must increase speed to
reach the start line on time.
When the end point is past the start line, the line is red.
This indicates the boat must reduce speed to avoid a
penalty for reaching the start line before the timer expires.
When the end point is on the start line, the line is white.
This indicates the boat is moving at an optimal speed to
reach the start line when the timer expires.
By default, the start line guidance window and the race
timer window appear in the Sail Racing combination
screen.
Sailing Features 29